PLC Tools SIM-S5V Servo Simulator 5VDC User Manual
The Servo Axis Simulator was developed to assist integrators in application development for projects with analog servo drives and incremental encoder feedback.
It allows motion application debugging in the lab environment, virtually on the table, with PLC or CNC only and without actual running motors and drives. This reduces installation time from weeks to hours.
Servo simulator uses an advanced microcontroller that allows high-speed move simulation and fast response
CNC or Motion Controller Connection
ControlLogix 1756-M02AE Connection
Encoder Simulator Signals
|A||Encoder Output Channel A+||A-||Encoder Output Channel|
|B||Encoder Output Channel B+||B-||Encoder Output Channel B|
|Z||Encoder Output Channel Z+||Z-||Encoder Output Channel Z|
|Analog||Simulator Analog Input||Enable IN||Simulator Enable Input|
|Enable +||Enable power source||Common||External PS Common|
|+5V||External 5V PS Positive|
All signals referenced to the Common terminal and 0V of the external power supply.
|Both LEDs OFF||Simulator Enable is OFF|
|Both LEDs Blinking Fast||Simulator enabled and axis holding position|
|One LED ON||Servo enabled and simulated axis moving in Positive or Negative direction|
|5V DC +/- 15%
100mA max (load dependent)
Max Output Current
Encoder Output Isolation
Max Output Frequency
Pulses Per Revolution
|A/A- B/B- Z/ZOutput
25mA per channel
32.500 kHz per ch.
256 per channel,
1024 all channels
Max Input Current
|+/-10V GND ref.
10-bit +/-10V range
|Drive Enable Input
Max Input Current
Note: All signals referenced to the Common terminal.
Currently the device does not carry any agency approvals and is not compliant with RoHS.
This device is intended to provide general assistance with application development and debugging and can’t be used in live production systems. Accordingly, production system must be tested and commissioned with real servo systems and drives to ensure safe and reliable operation.
IN NO EVENT SHALL THE DEVICE MANUFACTURER BE LIABLE FOR ANY DAMAGES OF ANY KINDINCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF PROFIT OR DAMAGE.
The examples and diagrams in this manual are included for illustrative purposes only. Because of the many variables and requirements associated with any particular installation, the device manufacturer cannot assume responsibility or liability for actual use based on the examples and diagrams. Before making any decision or taking any action that might affect your equipment, you should consult a qualified professional advisor.