The SIM-ALP2 can simulate a 2 wire 4-20 mA loop powered device, a 4 wire 4-20mA current source without an external power supply, or a 0-10VDC signal without an external power supply.
Simulating is easy in 1 mA/V or 0.1 mA/V increments by simply clicking the up and down buttons. Each point can be individually calibrated to suit your needs.
With a range of 0-22mA and -10VDC to +10VDC, it can also simulate over and under range conditions.
Comes with carrying case and alligator leads.
Great value when you don't need an expensive calibrator such as a Fluke 707.
Click here to view the user manual.
Specifications
- Functionality
- 0-22 mA 2-Wire Device
- 0-22 mA Current Source
- +/-0-10 V Voltage Source
- Power Supply
- Internal Power
- Battery 2xAA
- Ni-MH or Alkaline
- 2-Wire Current
- 12-30V DC External Power
- Current Output
- Output Range 0mA to 22mA
- Fixed Steps of 0.1mA or 1mA increments
- Output Accuracy ±1% of full scale
- Load Range 0-500 Ohm
- Voltage Output
- Output Range -10V to 10V
- Fixed Steps 0f 0.1V or 1V increments
- Output Accuracy ±1% of full scale
- Minimum Load 20kOhm
- Protection
- Reverse Polarity,
- Over-current, Open Wire,
- Excessive Loop Voltage
2 Reviews Hide Reviews Show Reviews
-
Analog Simulator and Generator
This is one of the best tools out there. I had got one a few years back and lost it. I had to have another one. Small enough to fit in your palm. I work in the industrial HVAC industry and this is one of the most helpful troubleshooting tools I have ever had the pleasure of owning. Accurate enough for calibrating controls to get you by in a pinch until you can get a higher end tool. Affordable enough to buy out of your own pocket if your work won't approve an expensive unit. 5 starts I'm my book!
-
Great Analog Simulator at a reasonable price!!!
Compact analog simulator that works great to source and simulate 4-20mA signals. This is a must have for troubleshooting analog inputs and cable runs! It also comes with a nice storage case. Highly recommended!!!
