The SIM-ALP2 can simulate a 2 wire 4-20 mA loop powered device, a 4 wire 4-20mA current source without an external power supply, or a 0-10VDC signal without an external power supply.

Simulating is easy in 1 mA/V or 0.1 mA/V increments by simply clicking the up and down buttons.  Each point can be individually calibrated to suit your needs.

With a range of 0-22mA and -10VDC to +10VDC, it can also simulate over and under range conditions.

Comes with carrying case and alligator leads.

Great value when you don't need an expensive calibrator such as a Fluke 707.

Click here to view the user manual.

Application Examples

Specifications

• Functionality

  • 0-22 mA 2-Wire Device

  • 0-22 mA Current Source

  • +/-0-10 V Voltage Source

• Power Supply

  • Internal Power

    • Battery 2xAA

    • Ni-MH or Alkaline

  • 2-Wire Current

    • 12-30V DC External Power

• Current Output

  • Output Range 0mA to 22mA

  • Fixed Steps of 0.1mA or 1mA increments

  • Output Accuracy ±1% of full scale

  • Load Range 0-500 Ohm

• Voltage Output

  • Output Range -10V to 10V

  • Fixed Steps 0f 0.1V or 1V increments

  • Output Accuracy ±1% of full scale

  • Minimum Load 20kOhm

• Protection

  • Reverse Polarity,

  • Over-current, Open Wire,

  • Excessive Loop Voltage